TEL:   +86-574-66376117
FAX:  +86-574-63833222
E-mail: gasket@aliyun.com
sale@gasketcn.com
ADD:Henghe Industry District,Cixi City ,Ningbo 315318 China.

 
Products Center >> Ptfe(Teflon)Series >> GLG-802 PTFE Rod

F-504 PTFE Rod

[ Features ]
There are two kinds of PTFE rods to offer. One is manufactured by Paste extruding method in the diameter from 4 to 9mm and the other Is made by ram extruding method is the diameter from 10to 50mm; rods Over the diameter 50mm are manufactured by moulding. PTFE is the most chemical-resistant of all known plastics. It does not age.
PTFE has a wide range of practicable temperature from 180%°C - +260°C and a wax-like surface to which anything hardly sticks.
PTFE has the lowest coefficient of friction of all known solid materials. It has the best electrical properties of all plastics.

[ Specifications ]

TYPES

Diameter(mm)

Length(mm)

Nominal

Tolerance

Nominal

Tolerance

SFFBN

4,5,6

+0.48
0

100

+5.0

7,8,9

+0.58
0

SF×BN

10,13,15
16,18

+1.10
0

1000

+3.60

20,25,30

+1.30
0

35,40,45
50

+1.60
0

55,60,65,70,75
80,85,90,100

+2.00
0

100-300

+2.50

110,120,130
140,150

+2.50
0

180,200,250
270,300

+3.0
0

100

+2.0

 
[ Main properties ]

 Properties

Unit

Result

Apparent density

g/cm3

2.10—2.30

Tensile strength (min)

MPa

14.0

Ultimate elongation (min)

%

140


Note:
When the diameter of rod is larger than 16mm.only test Apparent density

[ Applications ]
Electrical Insulation,seal,Antisticking materials.



  Copyright Notice © 2007 Ningbo XinYi Sealing Gasket CO.;LTD.
All rights reserved Designed & Supported By Sealing Network